technical data sheet sma straight plug 32S102-271L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-15; en 122110; mil-std-348 documents assembly instruction 32 a6 or 32 a20 material and plating connector parts material plating center contact brass aurodur?, gold plated outer contact cube or equivalent aurodur?, gold pla ted coupling nut cube or equivalent gold, 0.1 m dielectric ptfe gasket silicone
technical data sheet sma straight plug 32S102-271L5 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 18 ghz vswr 1.05 + 0.01 x f [ghz] insertion loss 0.03 x db insulation resistance 3 5 x10 3 m w center contact resistance 3 m w outer contact resistance 2 m w test voltage 1000 v rms working voltage 480 v rms power handling (at 20 c, sea level, vswr 1.0) 200 w @ 2 ghz rf-leakage 3 100 db up to 1 ghz - limitations are possible due to the used cable ty pe - mechanical data mating cycles min. 500 coupling nut retention 3 270 n coupling test torque max. 1.7 nm recommended torque 0.8 nm to 1.1 nm environmental data temperature range -65c to +165c thermal shock mil-std-202, meth. 107, cond. b corrosion mil-std-202, meth. 101, cond. b vibration mil-std-202, meth. 204, cond. d shock mil-std-202, meth. 213, cond. i moisture resistance mil-std-202, meth. 106 rohs compliant tooling n/a suitable cables ut 85, rg 405 weight weight 2.50 g/pce draft date approved date rev. engineering change n umber name date wallner markus 24/04/07 j_krautenbacher 21.07.16 d 00 15-1629 i_wallner 21.07.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr a nty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
